Sand trap RI 100N11. L=0.5m. F900KN. Ondine grid

Self-supporting sand trap Type I according to EN1433. High-quality self-compacting concrete C55/67 with a reinforcement mesh. 100% recyclable cast iron and concrete. Resistant to frost, water, salts, oil and petrol etc. Due to its design, the sand traps have a built-in resistance of strength class F, 900 kN. The intended resistance is guaranteed by the whole. The sand traps have a tongue and groove connection and a recess for a safety joint (SF). In the case of a liquid-tight version, this recess must be sealed. The top of the sand trap is provided with an integrated edge protection in galvanised steel (thickness 4 mm), anchored in the concrete (height 3 cm). The sand trap complies with the European Standard EN1433. Dimensions: length 50 cm; internal width 10 cm; external width 17.2 cm; fixed height 49 cm. A knock-out of Ø 110 mm is provided on 1 side. On the other side there is a knock-out of Ø 160 mm. This can optionally be used for an extra connection to the sewer. Weight 72kg. Aesthetic ONDINE grating made of nodular cast iron FGS 500-7, length 50cm. Pre-assembled on the gutter using a patented mounting system. Grating consisting of elongated corrugated openings of 14 mm specially designed to meet the needs of people with reduced mobility. Thanks to the exceptional properties of the grating surface (anti-slip, channelling effect), maximum absorption capacity is guaranteed. The grating complies with load class F, 900 kN according to European Standard EN 1433. The self-supporting drainage channels allow installation without a lateral concrete casing (only a foundation is necessary). Installation instructions available on request.