Alarm oil separator Labkotec idset-34. Back-up alarm. 5m cable

idSET-34 is an alarm system intended for monitoring liquid levels in Oil, Petrol and Sludge separators in particular. The system consists of an idSET-34 control unit for wall mounting and a high water backwater sensor with standard 5m cable which is installed in the separator. The sensor cable can be extended with a junction box. Up to three different types of sensors can be connected to the control unit which can be used to detect: Oil layer thickness (idOil-OIL oil sensor) High liquid level (idOil-LIQ backwater sensor) Sludge layer thickness (idOil-SLU sludge sensor) The LED indicators of the device indicate alarms and faults of the sensor. In alarm and fault situations the buzzer sounds an alarm and the potential-free relays are switched to the alarm position. The 4 relays are of the failsafe type, which means that they also go into alarm status when the power supply fails. The idOil sensors and cable are EX standardized and may be installed in an explosion hazardous area.

IP classification cabinet IP65. Ambient temperature -30 to +60 grC. 4 relay outputs 5A, 250V AC/30V DC,100 VA floating. Ex classification cabinet Ex II (1) G [Ex ia Ga] IIB. Ex classification sensor Ex II 1 G Ex ia IIA T5 Ga. Measuring principle sensor Conductive. IP classification sensor IP68. Cable type 2x0.75mm2 PUR unshielded. Display LED alarm status lights. Weight 650 g. Wall mounting. Medium Petrol, Biodiesel, Diesel, Lubricating oil and Water. Power supply AC 230V 50-60 Hz. Housing material Polycarbonate.