Rainwater reuse system garden Easy Rain 10,000 l. Pre-assembled

Complete system consisting of; • A PE (polyethylene) rainwater tank Easy Rain 10000, telescopic shaft up to 70 cm including lid (traffic load up to 200 kg), DIN 1989 with rubber seal, manhole 600 mm. Waterproof transition from tank to shaft! A conical top section making this tank very pressure-resistant. Lifting eyes to easily place the tank. Dimensions lxwxh=330x240x185 cm. Inlet and outlet 160 mm. Weight 340 kg. The tank has a limited installation depth and is recommended for high groundwater levels and/or stones that make digging difficult. Suitable for underground installation. • Rainwater filter Integral 160 mm, • Quiet inlet, slows down the incoming water and prevents any sediment from being stirred up. • Garden hose plug with automatic water stop function, • Fully automatic underwater hydrophore pump suitable for pumping clean water. Built-in electronic control that protects and regulates the pump and pumps the water to the surface without any problems. With backflow and dry-running protection. Maximum flow rate 6.3 m3/h. 230V, 50Hz. Power cable 15m with plug Thanks to the flat shape, this rainwater tank has a lower installation depth. Due to its ribbed construction, there is pressure relief on the sides of the tank and it is easier/quicker to install.

Technical data sheet rainwater reuse system Easy Rain 10,000l

Technical drawing Easy Rain storage tank 10,000 l

Installation instructions Easy Rain tanks